Bathroom top, seat and trim set
TP2534
| Component | Qty | Size / thickness | Gross area m² | Est. mass kg | Est. weight N |
|---|---|---|---|---|---|
| Main vanity topproject-9 · TP2534 | 1 | 61.375 × 24.7520 mm thick | 0.980 | 47.0 | 461 |
| Seatproject-9 · TP2534 | 1 | 32.5 × 12.87520 mm thick | 0.270 | 13.0 | 127 |
| Long stripproject-9 · TP2534 | 1 | 46 × 520 mm thick | 0.148 | 7.12 | 69.9 |
| Small stripproject-9 · TP2534 | 1 | 15.375 × 3.43820 mm thick | 0.0341 | 1.64 | 16.1 |
Thickness and density used in this table
- Main vanity top: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).
- Seat: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).
- Long strip: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).
- Small strip: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).
Per-piece gross estimates. Sink and fixture openings are not deducted. Blank results need missing inputs; support examples may use separate, labeled assumptions.
Related surfaces share one view. Each component retains its own dimensions, thickness and quantity; the spacing is schematic.
Measurements & calculation steps
Main vanity top
length: 61.375 in · width: 24.75 in · sink Center Local Offset Reading: 31.25 in · edge Corner Radius Reading: 1 in
A = (61.375 × 24.75) in² × 0.0254² = 0.980 m²
V = A × 0.02 = 0.0196 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 47.0 kg
Fg = mg ≈ 461 N3-inch edge shown in perspective is a built-up/edge detail, not slab thickness. Handwritten material note indicates 2 cm. Gross slab rectangle before cutout. Perspective shows front and side edge faces. No independently dimensioned fascia cut list; do not manufacture an inferred pair of strips from the picture.
sink: length: 18 in · width: 11.75 in · corner radius: 2 in. Template and placement must be confirmed; not deducted from the gross outline.
Seat
length: 32.5 in · width: 12.875 in
A = (32.5 × 12.875) in² × 0.0254² = 0.270 m²
V = A × 0.02 = 0.00540 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 13.0 kg
Fg = mg ≈ 127 NSeat rectangle reads 32.5 x 12.875 in. This is an unverified drawing reading; gross rectangle can be explored.
Long strip
length: 46 in · width: 5 in
A = (46 × 5) in² × 0.0254² = 0.148 m²
V = A × 0.02 = 0.00297 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 7.12 kg
Fg = mg ≈ 69.9 NClearly dimensioned nominal rectangle. Function is not inferred.
Small strip
length: 15.375 in · nominal Width: 3.5 in · deduction: 0.062 in · finished Width: 3.438 in
A = (15.375 × 3.438) in² × 0.0254² = 0.0341 m²
V = A × 0.02 = 0.000682 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 1.64 kg
Fg = mg ≈ 16.1 NWidth explicitly written 3.5 minus 1/16. Finished 3.4375 is arithmetic interpretation. Polish note and edge symbol are not openings.
