PROJECT 08 / TCE4047

Counters, bar and wall panel

Two drawing sheets record a bar, island, desk, vanity and a raised wall panel.

04stonework groupsDrawingoutside outlinesPhysics 12geometry & algebra

DRAWING CHECK · 29 OCTOBER 2026

8 retained component records. These tables cover selected readable outlines, not the whole job. Mass and weight are gross estimates before sink and fixture deductions.

What was checked and what is still missing

Compared with the paper

Both sheets inspected; 35.25 × 25.5 counter, 59.5 × 45 island, 128 × 14.5 bar checked.
Large wall-panel width 38 + 47.5 + 37.5 = 123; overall height 30.375 and base 18.5 checked.
Separate 84.75 × 21 desk and 75.5 × 22.25 double vanity retained.

Needs confirmation

Main L counter has unresolved leg width and remains omitted; appliance gap must remain empty.
Powder vanity outline, backsplash lengths and outlet/cutout templates require confirmation.
Bar internal dashed line is not its perimeter.

The source images were visually reviewed; handwriting and field dimensions are not independently verified. Actual support positions and connection capacities are also unconfirmed.

Understand the calculations & rebuild in CAD →Audit notes for this project →

PROJECT 08 / THREE-DIMENSIONAL PREVIEW

Kitchen island top

59.5 × 45 in · 20 mm

Drag to orbit after opening the 3D model. Use + / − to zoom.

Gross outer geometry from project-8a.jpg; 20 mm material thickness. Surface finish is illustrative.

Download 3D mesh (.obj) ↓

SUPPORTS & JOINTS

How would the loads be carried?

Compare structural options and per-piece force calculations for Project 08, with assumed layouts and unresolved strength checks clearly identified.

Preliminary scenarios · installation details unverified

View support & joint calculations ↗

THE PROJECT AT A GLANCE

08.01 Kitchen counter, island and bar set08.02 Kitchen wall-panel set08.03 Desk08.04 Double vanity

Assembly sketches join only faces supported by the drawing. Other pieces are grouped as sets. These are reconstructed schematics, not AutoCAD exports.

08.01 / RELATED STONE SET

Kitchen counter, island and bar set

TCE4047

Related pieces share one view; spacing is schematic. Quantities remain in the table.

Gross estimates per piece · dimensions in inches; thickness in mm
Component	Qty	Size / thickness	Gross area m²	Est. mass kg	Est. weight N
Small kitchen rectangleproject-8a · TCE4047	1	35.25 × 25.520 mm thick	0.580	27.8	273
Islandproject-8a · TCE4047	1	59.5 × 4520 mm thick	1.73	82.9	813
Barproject-8a · TCE4047	1	128 × 14.520 mm thick	1.20	57.5	564

Thickness and density used in this table

Small kitchen rectangle: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).
Island: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).
Bar: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).

Per-piece gross estimates. Sink and fixture openings are not deducted. Blank results need missing inputs; support examples may use separate, labeled assumptions.

Related surfaces share one view. Each component retains its own dimensions, thickness and quantity; the spacing is schematic.

Measurements & calculation steps

Small kitchen rectangle

length: 35.25 in · width: 25.5 in

A = (35.25 × 25.5) in² × 0.0254² = 0.580 m²
V = A × 0.02 = 0.0116 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 27.8 kg
F_g = mg ≈ 273 N

Gross nominal rectangle.

Island

length: 59.5 in · width: 45 in

A = (59.5 × 45) in² × 0.0254² = 1.73 m²
V = A × 0.02 = 0.0345 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 82.9 kg
F_g = mg ≈ 813 N

Clearly readable standalone rectangle; useful representative piece. No cutouts shown.

Bar

length: 128 in · width: 14.5 in

A = (128 × 14.5) in² × 0.0254² = 1.20 m²
V = A × 0.02 = 0.0239 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 57.5 kg
F_g = mg ≈ 564 N

Top edge partly under paper but 14.5 readable; nominal gross rectangle.

08.02 / RELATED STONE SET

Kitchen wall-panel set

TCE4047

Related pieces share one view; spacing is schematic. Quantities remain in the table.

Gross estimates per piece · dimensions in inches; thickness in mm
Component	Qty	Size / thickness	Gross area m²	Est. mass kg	Est. weight N
Raised-center kitchen panelproject-8a · TCE4047	1	123 × 30.37520 mm thick	1.83	87.9	863
Small panelproject-8a · TCE4047	1	24.75 × 18.62520 mm thick	0.297	14.3	140
Long low panelproject-8a · TCE4047	1	126.75 × 6.12520 mm thick	0.501	24.0	236

Thickness and density used in this table

Raised-center kitchen panel: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).
Small panel: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).
Long low panel: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).

Per-piece gross estimates. Sink and fixture openings are not deducted. Blank results need missing inputs; support examples may use separate, labeled assumptions.

Related surfaces share one view. Each component retains its own dimensions, thickness and quantity; the spacing is schematic.

Measurements & calculation steps

Raised-center kitchen panel

left shoulder: 38 in · center width: 47.5 in · right shoulder: 37.5 in · base depth: 18.5 in · overall depth: 30.375 in · overall length: 123 in · opening horizontal callouts reading: [20.125, 21.125, 8.75, 6.25] in · opening bottom offsets reading: [7.875, 7.5, 7.5] in

A = 2,839.562 in² (rectangle addition) × 0.0254² = 1.83 m²
V = A × 0.02 = 0.0366 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 87.9 kg
F_g = mg ≈ 863 N

Gross external profile only; small outlet/fitting openings are not deducted.

outlet: width Reading: 2.25 in. Template and placement must be confirmed; not deducted from the gross outline.

small low opening: height Reading: 1 in. Template and placement must be confirmed; not deducted from the gross outline.

Small panel

length: 24.75 in · width: 18.625 in

A = (24.75 × 18.625) in² × 0.0254² = 0.297 m²
V = A × 0.02 = 0.00595 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 14.3 kg
F_g = mg ≈ 140 N

One outlet drawn; outlet size not reliably resolved. Gross rectangle only.

outlet: width Reading: 2.25 in. Template and placement must be confirmed; not deducted from the gross outline.

Long low panel

length: 126.75 in · width: 6.125 in · opening local callouts reading: [25.875, 21.125, 19, 15] in

A = (126.75 × 6.125) in² × 0.0254² = 0.501 m²
V = A × 0.02 = 0.0100 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 24.0 kg
F_g = mg ≈ 236 N

Two outlet openings shown; callouts crowded, not deducted. Gross rectangle only.

outlet: width Reading: 4.75 in · height Reading: 2.5 in. Template and placement must be confirmed; not deducted from the gross outline.

08.03 / SOLID STONE OUTLINE

Desk

TCE4047

Related pieces share one view; spacing is schematic. Quantities remain in the table.

Gross estimates per piece · dimensions in inches; thickness in mm
Component	Qty	Size / thickness	Gross area m²	Est. mass kg	Est. weight N
Deskproject-8b · TCE4047	1	84.75 × 2120 mm thick	1.15	55.1	541

Thickness and density used in this table

Desk: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).

Per-piece gross estimates. Sink and fixture openings are not deducted. Blank results need missing inputs; support examples may use separate, labeled assumptions.

The table records the gross outside outline, with quantities and per-component calculations.

Measurements & calculation steps

Desk

length: 84.75 in · width: 21 in

A = (84.75 × 21) in² × 0.0254² = 1.15 m²
V = A × 0.02 = 0.0230 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 55.1 kg
F_g = mg ≈ 541 N

3-inch backsplash note is a height, not stone thickness. No separate backsplash quantity inferred.

08.04 / SOLID STONE OUTLINE

Double vanity

TCE4047

Related pieces share one view; spacing is schematic. Quantities remain in the table.

Gross estimates per piece · dimensions in inches; thickness in mm
Component	Qty	Size / thickness	Gross area m²	Est. mass kg	Est. weight N
Double-sink vanityproject-8b · TCE4047	1	75.5 × 22.2520 mm thick	1.08	52.0	510

Thickness and density used in this table

Double-sink vanity: 20 mm drawing reading; 2400 kg/m³ (Assumed study value).

Per-piece gross estimates. Sink and fixture openings are not deducted. Blank results need missing inputs; support examples may use separate, labeled assumptions.

The table records the gross outside outline, with quantities and per-component calculations.

Measurements & calculation steps

Double-sink vanity

length: 75.5 in · width: 22.25 in · left Sink Offset Reading: 15.75 in · right Sink Offset Reading: 15.75 in

A = (75.5 × 22.25) in² × 0.0254² = 1.08 m²
V = A × 0.02 = 0.0217 m³
ρ = 2,400 kg/m³ · Assumed study value
m = ρV ≈ 52.0 kg
F_g = mg ≈ 510 N

Two sinks drawn; readable one nominal template 17.75 x 11.75 R1. Both templates and placement should be confirmed before deductions. 3-inch backsplash is not slab thickness.

sink: length Reading: 17.75 in · width Reading: 11.75 in · radius Reading: 1 in. Template and placement must be confirmed; not deducted from the gross outline.

faucet: Template dimensions unconfirmed. Template and placement must be confirmed; not deducted from the gross outline.

WHY THE CALCULATIONS MATTER

Understand the material before planning the job.

Area and thickness determine stone volume. Density turns that into an estimated mass, and gravity gives its weight. These quantities support planning and discussion with the family business; supports, handling and installation need fabricator or qualified professional review.

Area → volume

A = L × D, or add rectangle areas
V = A × t
1 in = 0.0254 m

Table results are per component; quantity is shown separately. Sink and fitting templates remain notes until confirmed. Grouping does not combine different rooms or alternative sheet versions into one slab.

Volume → mass → weight

m = ρV
F_g = mg
g = 9.81 m/s²

Mass uses kilograms and weight uses newtons. A blank result means thickness or density is unconfirmed. Density assumptions and provisional readings remain identified in the calculation notes.

Original drawing references & material evidence

Original paper excerpts are preserved as references. Their appliance symbols and construction marks are not extra stone entries. Customer fields are removed.

Original supplied drawing excerpt project-8a.jpg — project-8a · source reference

Original supplied drawing excerpt project-8b.jpg — project-8b · source reference

TCE4047

Study assumption: 2,400 kg/m³. A 2018 TCE Stone Oceania SDS lists a family range of 2,188–2,405 kg/m³. Regional formulation and applicability to this Canadian product code are unconfirmed.

TCE Stone Oceania SDS · 2018 · density p.4 ↗
TCE Stone Canada · product catalogue ↗

Supplied business drawings · transcription and calculation drafts. Personal checks, CAD models and fabricator verification have not yet been recorded.

Grouped measurements CSV ↓Original transcription archive · broader scope ↓Earlier teaching model ↗