{
  "id": 2,
  "notes": [
    "Sheet explicitly says 2 cm (20 mm).",
    "Handwritten material appears TCE2057 or TCE2051; user supplied TCE2051 is authoritative for catalogue mapping.",
    "Quantity four of 32 by 11 1/4 strips is based on four separately drawn blue-ink rectangles; pencil nesting sketches are excluded as repeats.",
    "Sink opening dimensions may be nominal fixture sizes rather than fabrication cutouts; confirm before using net stone.",
    "Nine blue-ink physical pieces are present: one L, one long panel, two50x32 panels, four32x11.25 strips, one31.75x7 strip. Existing transcription had all groups, but portfolio must expose each group/quantity, not only representative.",
    "safeEngineeringRegion fractions are approximate inspection guides [left,top,right,bottom], not permission to publish uninspected pixels. Confirm redaction visually after cropping.",
    "Physical quantity is an inventory count, not an area/volume aggregate; alternative sheets and possible apron views must be reconciled separately."
  ],
  "items": [
    {
      "id": "2-main-L",
      "label": "L-shaped counter",
      "sheet": "project-2.jpg",
      "kind": "countertop",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "length": 99,
        "width": 36.75,
        "leftReturnWidth": 28,
        "topRunDepth": 25.75,
        "outerDepth": 36.75,
        "openingCornerOffset": 4.375
      },
      "lengthIn": 99,
      "widthIn": 36.75,
      "geometry": "polygon",
      "polygonIn": [
        [
          0,
          0
        ],
        [
          99,
          0
        ],
        [
          99,
          25.75
        ],
        [
          28,
          25.75
        ],
        [
          28,
          36.75
        ],
        [
          0,
          36.75
        ]
      ],
      "status": "partial",
      "notes": [
        "Left return width 28; long run depth 25 3/4. Gross area 99*25.75+28*(36.75-25.75).",
        "outer polygon before cutout"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [
        {
          "id": "2-main-L-hole-1",
          "label": "rotated rectangle",
          "kind": "opening",
          "lengthIn": 14.5,
          "widthIn": 10.5,
          "diameterIn": null,
          "radiusIn": null,
          "quantity": 1,
          "shape": "rotated rectangle",
          "dimensionsIn": {
            "length": 14.5,
            "width": 10.5
          },
          "notes": [
            "Rotated sketch; corner/rotation/position not fully dimensioned. May be nominal fixture rather than required cutout.",
            "Unverified; drawing schematic, not dimensionally calibrated."
          ],
          "status": "Template/placement needs confirmation",
          "parent": "2-main-L"
        }
      ],
      "area": 1.84338341,
      "volume": 0.036867668199999995,
      "mass": 88.48240367999999,
      "weight": 868.0123801008,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": false,
      "sourceMaterialMissing": false
    },
    {
      "id": "2-main-rectangle",
      "label": "Long rectangular panel",
      "sheet": "project-2.jpg",
      "kind": "countertop",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "length": 60.25,
        "width": 32,
        "jointOrOpeningOffsetFromLeft": 34.75
      },
      "lengthIn": 60.25,
      "widthIn": 32.0,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "partial",
      "notes": [
        "Joint line/fixture location 34 3/4 from left is not another panel quantity.",
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [
        {
          "id": "2-main-rectangle-hole-1",
          "label": "rectangular opening",
          "kind": "opening",
          "lengthIn": 11.0,
          "widthIn": 10.5,
          "diameterIn": null,
          "radiusIn": null,
          "quantity": 1,
          "shape": "rectangular opening",
          "dimensionsIn": {
            "length": 11,
            "width": 10.5
          },
          "notes": [
            "11-inch top/bottom width and10 1/2 height shown. Seam indicated J at34 3/4 fromleft. Actual opening offset along depth not given.",
            "Unverified; drawing schematic, not dimensionally calibrated."
          ],
          "status": "Template/placement needs confirmation",
          "parent": "2-main-rectangle"
        }
      ],
      "area": 1.24386848,
      "volume": 0.024877369599999997,
      "mass": 59.705687039999994,
      "weight": 585.7127898624,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": false,
      "sourceMaterialMissing": false
    },
    {
      "id": "2-side-panels",
      "label": "Two separately drawn side panels",
      "sheet": "project-2.jpg",
      "kind": "panel",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 2,
      "dimensionsIn": {
        "length": 50,
        "width": 32
      },
      "lengthIn": 50.0,
      "widthIn": 32.0,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 1.032256,
      "volume": 0.020645120000000003,
      "mass": 49.54828800000001,
      "weight": 486.0687052800001,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false
    },
    {
      "id": "2-narrow-strips",
      "label": "Four separately drawn narrow strips",
      "sheet": "project-2.jpg",
      "kind": "strip",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 4,
      "dimensionsIn": {
        "length": 32,
        "width": 11.25
      },
      "lengthIn": 32.0,
      "widthIn": 11.25,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 0.23225759999999998,
      "volume": 0.004645152,
      "mass": 11.1483648,
      "weight": 109.365458688,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false
    },
    {
      "id": "2-small-strip",
      "label": "Small strip",
      "sheet": "project-2.jpg",
      "kind": "strip",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "length": 31.75,
        "width": 7
      },
      "lengthIn": 31.75,
      "widthIn": 7.0,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 0.14338681,
      "volume": 0.0028677362,
      "mass": 6.882566880000001,
      "weight": 67.51798109280001,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false
    },
    {
      "id": "2-pencil-L-layout",
      "label": "Pencil cutting / nesting view beside L-counter",
      "sheet": "project-2.jpg",
      "kind": "view",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "longSpan": 99,
        "leftDepth": 36.75,
        "adjacentStripSpan": 32,
        "adjacentStripWidth": 11.25
      },
      "lengthIn": null,
      "widthIn": null,
      "geometry": "unresolved",
      "polygonIn": null,
      "status": "possible_view",
      "notes": [
        "Pencil99 and36 3/4 match L outline. Two11 1/4 marks refer to strip nesting."
      ],
      "countingNote": "Repeat of blue L countertop and strip layout, not an additional counter/strip.",
      "cutouts": [],
      "area": null,
      "volume": null,
      "mass": null,
      "weight": null,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": false,
      "sourceMaterialMissing": false
    },
    {
      "id": "2-pencil-rectangle-layout",
      "label": "Pencil rectangular nesting layout",
      "sheet": "project-2.jpg",
      "kind": "view",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "layoutOuterWidth": 64,
        "leftColumnWidth": 32,
        "secondColumnWidth": 32,
        "columnLength": 50,
        "otherPanelLength": 60.25,
        "stripSizesWritten": [
          [
            32,
            11.25
          ],
          [
            32,
            11.25
          ],
          [
            32,
            7
          ]
        ]
      },
      "lengthIn": null,
      "widthIn": null,
      "geometry": "unresolved",
      "polygonIn": null,
      "status": "possible_view",
      "notes": [
        "No separate new physical piece added.7-inch strip pencil span32 differs from blue31 3/4; blue dimension retained."
      ],
      "countingNote": "Repeat nesting/layout of existing blue panels.64 is stock/layout width, not a new job-part dimension.",
      "cutouts": [],
      "area": null,
      "volume": null,
      "mass": null,
      "weight": null,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": false,
      "sourceMaterialMissing": false
    }
  ],
  "corrections": [
    "No new blue-ink part missing from earlier JSON; add explicit pencil view records and surface all existing quantity groups.",
    "First angled opening label is10 1/2 by14 1/2, provisionally rectangular, with a4 3/8 offset at inner corner."
  ],
  "publishedExcerptReview": {
    "project-2.jpg": {
      "safeEngineeringRegion": [
        0,
        0.15,
        1,
        0.71
      ],
      "publishedCropIssue": "Cuts off bottom fourth32x11.25 strip. Full blue-ink inventory ends around.71; exclude contact and lower pencil pricing. Pencil nesting views below may be separately cropped/redacted.",
      "engineeringBox": [
        0,
        0.15,
        1,
        0.71
      ],
      "redactBoxes": [],
      "extraEngineeringBoxes": [
        [
          0,
          0.59,
          0.35,
          0.705
        ],
        [
          0,
          0.7,
          0.36,
          0.823
        ]
      ],
      "notes": "Second optional pencil-only box stops above price arithmetic, but its lower edge is approximate; inspect carefully. Main engineeringBox already preserves all nine blue parts."
    }
  },
  "inventoryCounts": {
    "records": 7,
    "physicalQuantityWhereKnown": 9,
    "unknownQuantityGroups": 0,
    "viewRecords": 2,
    "openingLegendRecords": 0
  },
  "parts": [
    {
      "id": "2-main-L",
      "label": "L-shaped counter",
      "sheet": "project-2.jpg",
      "kind": "countertop",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "length": 99,
        "width": 36.75,
        "leftReturnWidth": 28,
        "topRunDepth": 25.75,
        "outerDepth": 36.75,
        "openingCornerOffset": 4.375
      },
      "lengthIn": 99,
      "widthIn": 36.75,
      "geometry": "polygon",
      "polygonIn": [
        [
          0,
          0
        ],
        [
          99,
          0
        ],
        [
          99,
          25.75
        ],
        [
          28,
          25.75
        ],
        [
          28,
          36.75
        ],
        [
          0,
          36.75
        ]
      ],
      "status": "partial",
      "notes": [
        "Left return width 28; long run depth 25 3/4. Gross area 99*25.75+28*(36.75-25.75).",
        "outer polygon before cutout"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [
        {
          "id": "2-main-L-hole-1",
          "label": "rotated rectangle",
          "kind": "opening",
          "lengthIn": 14.5,
          "widthIn": 10.5,
          "diameterIn": null,
          "radiusIn": null,
          "quantity": 1,
          "shape": "rotated rectangle",
          "dimensionsIn": {
            "length": 14.5,
            "width": 10.5
          },
          "notes": [
            "Rotated sketch; corner/rotation/position not fully dimensioned. May be nominal fixture rather than required cutout.",
            "Unverified; drawing schematic, not dimensionally calibrated."
          ],
          "status": "Template/placement needs confirmation",
          "parent": "2-main-L"
        }
      ],
      "area": 1.84338341,
      "volume": 0.036867668199999995,
      "mass": 88.48240367999999,
      "weight": 868.0123801008,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": false,
      "sourceMaterialMissing": false,
      "displayId": "2-main-L",
      "copyNumber": 1
    },
    {
      "id": "2-main-rectangle",
      "label": "Long rectangular panel",
      "sheet": "project-2.jpg",
      "kind": "countertop",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "length": 60.25,
        "width": 32,
        "jointOrOpeningOffsetFromLeft": 34.75
      },
      "lengthIn": 60.25,
      "widthIn": 32.0,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "partial",
      "notes": [
        "Joint line/fixture location 34 3/4 from left is not another panel quantity.",
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [
        {
          "id": "2-main-rectangle-hole-1",
          "label": "rectangular opening",
          "kind": "opening",
          "lengthIn": 11.0,
          "widthIn": 10.5,
          "diameterIn": null,
          "radiusIn": null,
          "quantity": 1,
          "shape": "rectangular opening",
          "dimensionsIn": {
            "length": 11,
            "width": 10.5
          },
          "notes": [
            "11-inch top/bottom width and10 1/2 height shown. Seam indicated J at34 3/4 fromleft. Actual opening offset along depth not given.",
            "Unverified; drawing schematic, not dimensionally calibrated."
          ],
          "status": "Template/placement needs confirmation",
          "parent": "2-main-rectangle"
        }
      ],
      "area": 1.24386848,
      "volume": 0.024877369599999997,
      "mass": 59.705687039999994,
      "weight": 585.7127898624,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": false,
      "sourceMaterialMissing": false,
      "displayId": "2-main-rectangle",
      "copyNumber": 1
    },
    {
      "id": "2-side-panels",
      "label": "Two separately drawn side panels",
      "sheet": "project-2.jpg",
      "kind": "panel",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 2,
      "dimensionsIn": {
        "length": 50,
        "width": 32
      },
      "lengthIn": 50.0,
      "widthIn": 32.0,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 1.032256,
      "volume": 0.020645120000000003,
      "mass": 49.54828800000001,
      "weight": 486.0687052800001,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false,
      "displayId": "2-side-panels-1",
      "copyNumber": 1
    },
    {
      "id": "2-side-panels",
      "label": "Two separately drawn side panels",
      "sheet": "project-2.jpg",
      "kind": "panel",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 2,
      "dimensionsIn": {
        "length": 50,
        "width": 32
      },
      "lengthIn": 50.0,
      "widthIn": 32.0,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 1.032256,
      "volume": 0.020645120000000003,
      "mass": 49.54828800000001,
      "weight": 486.0687052800001,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false,
      "displayId": "2-side-panels-2",
      "copyNumber": 2
    },
    {
      "id": "2-narrow-strips",
      "label": "Four separately drawn narrow strips",
      "sheet": "project-2.jpg",
      "kind": "strip",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 4,
      "dimensionsIn": {
        "length": 32,
        "width": 11.25
      },
      "lengthIn": 32.0,
      "widthIn": 11.25,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 0.23225759999999998,
      "volume": 0.004645152,
      "mass": 11.1483648,
      "weight": 109.365458688,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false,
      "displayId": "2-narrow-strips-1",
      "copyNumber": 1
    },
    {
      "id": "2-narrow-strips",
      "label": "Four separately drawn narrow strips",
      "sheet": "project-2.jpg",
      "kind": "strip",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 4,
      "dimensionsIn": {
        "length": 32,
        "width": 11.25
      },
      "lengthIn": 32.0,
      "widthIn": 11.25,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 0.23225759999999998,
      "volume": 0.004645152,
      "mass": 11.1483648,
      "weight": 109.365458688,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false,
      "displayId": "2-narrow-strips-2",
      "copyNumber": 2
    },
    {
      "id": "2-narrow-strips",
      "label": "Four separately drawn narrow strips",
      "sheet": "project-2.jpg",
      "kind": "strip",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 4,
      "dimensionsIn": {
        "length": 32,
        "width": 11.25
      },
      "lengthIn": 32.0,
      "widthIn": 11.25,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 0.23225759999999998,
      "volume": 0.004645152,
      "mass": 11.1483648,
      "weight": 109.365458688,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false,
      "displayId": "2-narrow-strips-3",
      "copyNumber": 3
    },
    {
      "id": "2-narrow-strips",
      "label": "Four separately drawn narrow strips",
      "sheet": "project-2.jpg",
      "kind": "strip",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 4,
      "dimensionsIn": {
        "length": 32,
        "width": 11.25
      },
      "lengthIn": 32.0,
      "widthIn": 11.25,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 0.23225759999999998,
      "volume": 0.004645152,
      "mass": 11.1483648,
      "weight": 109.365458688,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false,
      "displayId": "2-narrow-strips-4",
      "copyNumber": 4
    },
    {
      "id": "2-small-strip",
      "label": "Small strip",
      "sheet": "project-2.jpg",
      "kind": "strip",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "length": 31.75,
        "width": 7
      },
      "lengthIn": 31.75,
      "widthIn": 7.0,
      "geometry": "rectangle",
      "polygonIn": null,
      "status": "calculable",
      "notes": [
        "gross rectangle before any holes"
      ],
      "countingNote": "One separately drawn component/group; no complete-job aggregate assumed.",
      "cutouts": [],
      "area": 0.14338681,
      "volume": 0.0028677362,
      "mass": 6.882566880000001,
      "weight": 67.51798109280001,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": true,
      "sourceMaterialMissing": false,
      "displayId": "2-small-strip",
      "copyNumber": 1
    }
  ],
  "views": [
    {
      "id": "2-pencil-L-layout",
      "label": "Pencil cutting / nesting view beside L-counter",
      "sheet": "project-2.jpg",
      "kind": "view",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "longSpan": 99,
        "leftDepth": 36.75,
        "adjacentStripSpan": 32,
        "adjacentStripWidth": 11.25
      },
      "lengthIn": null,
      "widthIn": null,
      "geometry": "unresolved",
      "polygonIn": null,
      "status": "possible_view",
      "notes": [
        "Pencil99 and36 3/4 match L outline. Two11 1/4 marks refer to strip nesting."
      ],
      "countingNote": "Repeat of blue L countertop and strip layout, not an additional counter/strip.",
      "cutouts": [],
      "area": null,
      "volume": null,
      "mass": null,
      "weight": null,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": false,
      "sourceMaterialMissing": false
    },
    {
      "id": "2-pencil-rectangle-layout",
      "label": "Pencil rectangular nesting layout",
      "sheet": "project-2.jpg",
      "kind": "view",
      "materialCode": "TCE2051",
      "thicknessMm": 20,
      "quantity": 1,
      "dimensionsIn": {
        "layoutOuterWidth": 64,
        "leftColumnWidth": 32,
        "secondColumnWidth": 32,
        "columnLength": 50,
        "otherPanelLength": 60.25,
        "stripSizesWritten": [
          [
            32,
            11.25
          ],
          [
            32,
            11.25
          ],
          [
            32,
            7
          ]
        ]
      },
      "lengthIn": null,
      "widthIn": null,
      "geometry": "unresolved",
      "polygonIn": null,
      "status": "possible_view",
      "notes": [
        "No separate new physical piece added.7-inch strip pencil span32 differs from blue31 3/4; blue dimension retained."
      ],
      "countingNote": "Repeat nesting/layout of existing blue panels.64 is stock/layout width, not a new job-part dimension.",
      "cutouts": [],
      "area": null,
      "volume": null,
      "mass": null,
      "weight": null,
      "density": 2400,
      "densityStatus": "Assumed study value",
      "envelope": false,
      "eligible": false,
      "sourceMaterialMissing": false
    }
  ],
  "openings": [
    {
      "id": "2-main-L-hole-1",
      "label": "rotated rectangle",
      "kind": "opening",
      "lengthIn": 14.5,
      "widthIn": 10.5,
      "diameterIn": null,
      "radiusIn": null,
      "quantity": 1,
      "shape": "rotated rectangle",
      "dimensionsIn": {
        "length": 14.5,
        "width": 10.5
      },
      "notes": [
        "Rotated sketch; corner/rotation/position not fully dimensioned. May be nominal fixture rather than required cutout.",
        "Unverified; drawing schematic, not dimensionally calibrated."
      ],
      "status": "Template/placement needs confirmation",
      "parent": "2-main-L",
      "sheet": "project-2.jpg",
      "parentLabel": "L-shaped counter"
    },
    {
      "id": "2-main-rectangle-hole-1",
      "label": "rectangular opening",
      "kind": "opening",
      "lengthIn": 11.0,
      "widthIn": 10.5,
      "diameterIn": null,
      "radiusIn": null,
      "quantity": 1,
      "shape": "rectangular opening",
      "dimensionsIn": {
        "length": 11,
        "width": 10.5
      },
      "notes": [
        "11-inch top/bottom width and10 1/2 height shown. Seam indicated J at34 3/4 fromleft. Actual opening offset along depth not given.",
        "Unverified; drawing schematic, not dimensionally calibrated."
      ],
      "status": "Template/placement needs confirmation",
      "parent": "2-main-rectangle",
      "sheet": "project-2.jpg",
      "parentLabel": "Long rectangular panel"
    }
  ],
  "partCount": 9,
  "openingCount": 2,
  "viewCount": 2,
  "incompleteCount": 0,
  "code": "TCE2051"
}